Interconnections - Page 23 of 30 - Sylex

End of Content.

Interconnection

Interconnections

MMC® assemblies

Shuffle assemblies

Very Small Form Factor assemblies

MPO/MTP® Interconnections

Defense / Aerospace / Harsh Environment

PRIZM® MT/MXC™ assemblies

Other standard products

DURALINO fanout® trunk systems

Special products

PRIZM® LightTurn® assemblies

U-DQ FLEXO assemblies

Products

PRIZM LT – LC 2.0mm 12F bare ribbon fanout

PRIZM® LightTurn® is designed as a miniature detachable connector for high-speed, board-mounted Avago MicroPOD and MiniPOD modules, or for direct mounting on PCB using a mechanical-optical interface (MOI). The PRIZM® LT assembly with LC connectors on the second end is typically used during the design phase and testing of optical parameters

PRIZM LT – MT/MTP 12F round jumper

PRIZM® LightTurn® is designed as a miniature detachable connector for high-speed, board-mounted Avago MicroPOD and MiniPOD modules, or for direct mounting on PCB using a mechanical-optical interface (MOI). In combination with standard MTP connectors, it is suitable for a wide range of applications such as use in transceivers, parallel optics and supercomputing.

PRIZM LT – MT/MTP 12F ribbon jumper

PRIZM® LightTurn® is designed as a miniature detachable connector for high-speed, board-mounted Avago MicroPOD and MiniPOD modules, or for direct mounting on PCB using a mechanical-optical interface (MOI). In combination with standard MTP connectors, it is suitable for a wide range of applications such as use in transceivers, parallel optics and supercomputing.

SN BTW – SN BTW duplex jumper

The SN BTW duplex jumper is typically used inside of patch panels or distribution boxes to cross-connect of the input and output adaptors. This design is ideal for testing during the setup of the production procedure in the factory and for measuring process of optical values during production.
Easy manipulation, low space requirements because of the SN BTW connector in a combination of 900um cable.
We can offer you SM (OS2) and MM OM3, OM4, OM5) jumpers, as well as bend-insensitive single-mode jumpers with fiber G657.A. Jumpers, which can be terminated with all standard connectors.
OFNP cable option available

01x MXC – 12x LC/PC 900um 12F ROUND FANOUT

The fanout solution is designed for the testing of individual channels of MXC assemblies in the design stage. Fibres are separated into individual fibres, protected by 900um tubings and terminated by LC connectors with high-precision zirconia ferrules.
Individual channels terminated by LC connectors are identified by marking sleeves for easy identification of each channel.

01x MXC – 16x LC/PC 900um 16F ROUND FANOUT

The fanout solution is designed for the testing of individual channels of MXC assemblies in the design stage. Fibres are separated into individual fibres, protected by 900um tubings and terminated by LC connectors with high-precision zirconia ferrules.
Individual channels terminated by LC connectors are identified by marking sleeves for easy identification of each channel.

1x12f MTP to 12xLC 900um 12-fibers direct split – ET range

MTP-LC 12-fiber direct split (MTP to LC trunk) with extended temperature range is suitable product for FTTA, broadcast or other harsh environment applications. It is typically mounted in the Plastic distribution plastic box.
Fanouting is made directly in the MTP connector; therefore no additional furcation points are required.

1x16f MMC to 1x16f LC 16-fiber Duralino fanout

The version of our MMC to LC simplex fanout allows you to split the parallel 16-fiber link into individual simplex connections. The round cable combined with the compact and durable design of the Duralino fanout, allows rapid deployment of high density patching in SAN and LAN DataCenter environments, where additional cable protection is necessary.

2x PRIZM LT – MT/MTP 24F ribbon jumper

PRIZM® LightTurn® is designed as a miniature detachable connector for high-speed, board-mounted Avago MicroPOD and MiniPOD modules, or for direct mounting on PCB using a mechanical-optical interface (MOI). In combination with standard MTP connectors, it is suitable for a wide range of applications such as use in transceivers, parallel optics and supercomputing.

SYLEX is a world-class original design manufacturer
of high quality optical interconnect solutions and fiber optic sensors and sensing systems.