Interconnection

Interconnections

Products

  • Reusable and quickly installable pulling system
  • Allows the installation of hundreds of pre-terminated cables with only one purchased piece
  • Available in two basic sizes which cover the majority of different varieties of pre-terminated assemblies
  • Reusable and quickly installable pulling system
  • Allows the installation of hundreds of pre-terminated cables with only one purchased piece
  • Available in two basic sizes which cover the majority of different varieties of pre-terminated assemblies
  • The CS duplex trunk is typically terminated with 4 connectors. This simple design can be directly used for cross-connection of the newly designed QSFP-DD (400 to 2x 200 Gbit/sec) or SFP-DD (100 to 4x 25 Gbit/sec) transceivers.
  • The CS connector is based on the same 125um ferrules as LC connectors, offering equal optical and transmission parameters. In an environment where migration from 10, 40 or 100 Gbit/sec to 400 Gbit/sec is a must, the CS connector benefits from its size, which allows more then double the density in one 1U patch panel as compared to the LC connector.
  • The CS connector is ideal designed for serial, paralel and WDM optical schemes.
  • We can offer you SM (OS2) and MM (OM3, OM4, OM5) versions of trunks up to 144 fibres. Aside from the pure CS connector-based products, the hybrid versions with various types of single-fibre connectors are available as well
  • OFNP cable option available
  • The CS duplex patch cord is normaly used for cross-connection between patch panels or distribution boxes with products which contains optical fibers. The perfect feature of the CS connectors is an easy polarity change. The CS connectors fully meet today’s TOSA and ROSA optic requirments for minimum distance 3.8mm between ferrules, push-pull boot advantage and the small-form-factor connector design. New QSFP-DD and SFP-DD transceivers can be directly connected by these patch cords.
  • We can offer you SM (OS2) and MM (OM3, OM4, OM5) patch cords as well as bend-insensitive single-mode patch cords with fibre G657.A. Hybrid versions combined with all standard single-fibre connectors are available as well.
  • OFNP cable option available.
  • Light and rigid
  • Compact & simple design
  • Available with M6 kit for mouning onto the rack
  • Compatible with Duralino fanout® sizes XL, L & S
  • Duplex patchcords are typically used in patchpanels and distribution boxes to connect the elements of optical networks. We can offer you SM (OS2) and MM (OM1, OM2, OM3, OM4) patchcords as well as bend insensitive single mode patchcords with fiber G657.A. Patchcords can be terminated with all standard connectors.
  • 1U 19” sliding patchpanel offered by our company with E2000 front panel with simplex holes and back plates. Inside is a central spike, which is used as a fixing element for splice cassettes. Fully loaded with low loss pigtails and E2000 simplex adapters. It is easy to open them by a pair of plastic latches. Ejected patchpanel is hanging down in angle of 40 degrees and is easily accessible by operating staff.
  • 1U 19” sliding patchpanel offered by our company with E2000 front panel with simplex holes and back plates. Inside is a central spike, which is used as a fixing element for splice cassettes. Loaded with E2000 simplex adapters. It is easy to open them by a pair of plastic latches. Ejected patchpanel is hanging down in angle of 40 degrees and is easily accessible by operating staff.
  • 2U 19” sliding patchpanel offered by our company with E2000 front panel with simplex holes and back plates. Inside is a central spike, which is used as a fixing element for splice cassettes. Fully loaded with low loss pigtails and E2000 simplex adapters. It is easy to open them by a pair of plastic latches. Ejected patchpanel is hanging down in angle of 40 degrees and is easily accessible by operating staff.