End of Content.

    Interconnection

    • You are here:

    Panel System

    Products

    LC 2U patch panel – with adapters
    • 2U 19” sliding patchpanel offered by our company with LC front panel with simplex, duplex or quad holes and back plates. Inside is a central spike, which is used as a fixing element for splice cassettes. Loaded with LC simplex, duplex or quad adapters. It is easy to open them by a pair of plastic latches. Ejected patchpanel is hanging down in angle of 40 degrees and is easily accessible by operating staff.
    • LC Din Rail Box is metal box special designed to be snapped on din rail. It can be established on DIN rail without additional preparations or additional accessories. This allows for an easy integration and fiber accessibility in electrical distribution cabinets. 4 cable entry ports can be equipped with cable glands or PG blinds for end or pass through applications.
    • LC Din Rail Box is available in 3 variants – fully loaded with pigtails ready for splicing, just with adapters or empty with frontplate.
    • This Fibre to the Desk (FTTD) solution is based on a metal holder which is easy to use, features user-friendly installation and fits in most locations. Into this holder fit MTP-LC half-size modules from the MTP panel system. This module offers a capacity of up to six LC duplex ports, allowing it to connect up to six workstations.Advantages:
      • Rapid and simple installation
      • Wall or other surface mountable
      • Uses MPO/MTP-LC modules from Sylex MTP panel system
      • Connects up to six workstations
      • Minimal dimensions
      • Sleek design
    • WENDY module for 12 connections. Used as splitting point from back-bone 1x12f MTP cable to individual E2000 ports.
    • WENDY module for 24 connections used as splitting point from back-bone 1x24f MTP cable to individual LC ports.
    • WENDY module for 12 connections. Used as splitting point from back-bone 1x12f MTP cable to individual SC ports.
    • WENDY module for 12 connections used as splitting point from back-bone 1x12f MTP cable to individual LC ports.
    • WENDY module for 12 connections. Used as splitting point from back-bone 1x12f MTP cable to individual SC ports.
    • Simple 12- and 24-fiber MTP trunk cables used for backbone cabling are quite thin, typically with outer diameter between 3.0mm and 6.0mm. In order to protect the backbone links when installing in panel system, SYLEX offers Multi-hole cable gland, which can accomodate up to 4 cables. Fixing the cables with cable gland can prevent disconneciton by accident or damage of the cables caused by uncontrolled bending.

    SYLEX is a world-class original design manufacturer
    of high quality optical interconnect solutions and fiber optic sensors and sensing systems.

    Linkedin Youtube Facebook-f
    • SYLEX ©1995 - 2024. All rights reserved.

    Interconnection

    Join our Mailing list!

    Get all latest news, exclusive product release and company updates.